Please enter your E-mail Submission Shijiazhuang

Aosuo International Trade Co., Ltd.

冀ICP备19004403号-1

Powered by www.300.cn

Shijiazhuang Aosuo International Trade Co., Ltd.

How to determine the correct position of the stump through the receiving cavity
$!info.title

How to determine the correct position of the stump through the receiving cavity

Release time:
Just now
How to determine the correct position of the stump through the receiving cavity?

1、Standing position, when body weight is transferred to the prosthetic side, the ischium nodule can feel good load bearing;

there is no tenderness in the inferior pubic and adductor muscles; the skin at the end of the stump feels good at the bottom

of the receiving cavity; the external rotation angle of the foot is similar to that of the healthy foot.

2、If the sciatic nodule does not bear weight, the skin at the end of the limb is not exposed to the bottom of the receiving cavity;

Large skin folds appear in the medial part of the thigh of the stump, i.e. the upper margin of the receiving cavity,

these conditions may indicate that the soft tissue of the stump is not all pulled into the receiving cavity, not fully penetrated,

and needs to be removed from the prosthesis and worn again.

3、If you put on a prosthetic limb, standing, walking found that the inner part of the stump is uncomfortable, walking the tip of

the foot to the outside or to the inside too large, it shows that the prosthesis is not properly worn, the wear is crooked,

and the heavy wear needs to be removed. Attention should be paid to the direction of the inner wall of the receiving cavity

and the walking direction of the amputee
How to Wear Leg Prosthetics?
$!info.title

How to Wear Leg Prosthetics?

Release time:
2020-09-25 15:38
How to wear leg prosthetics
How to choose the right prosthetic .
$!info.title

How to choose the right prosthetic .

Release time:
2020-09-21 15:50
Application of temporary prostheses
$!info.title

Application of temporary prostheses

Release time:
2020-09-19 15:07
Application of temporary prostheses

Temporary prostheses are simple prostheses composed of a temporary residual limb receiving cavity and other prosthetic components such as mechanical knee joints, connectors, and artificial feet. Temporary stump receptacles are mostly made of plaster bandages, or they can be made of resin materials. The former is heavy and cheap, while the latter is light and expensive. Temporary prostheses are mainly used for early postoperative prosthetic installation. Early standing is very helpful for amputees to restore their body balance, reduce phantom limb sensation, and recover early.

   1. Assembly time:

   my country’s traditional prosthesis installation method is to wait for the wound to heal after the amputation, remove the stitches, and wait a few months or six months after being discharged home. The residual limb edema disappears and the residual limb is finalized before considering the installation of the prosthesis. In order to help the amputee to recover quickly, the early installation of temporary prostheses is advocated in modern times. The general temporary prosthesis can be installed after half a month after the amputation, the wound is healed well and the stitches are removed. There is also a plaster bandage immediately after the amputation to stand under the weight-bearing cavity to reduce edema.

   2. The method of applying temporary prostheses

   When wearing a temporary calf prosthesis, it is generally necessary to put several layers of stump sock on the stump, then pass the bottom end of the stump sock through the bottom hole of the temporary receiving cavity, and then pull the stump into the receiving cavity. After a few days of wearing it for a few weeks, the residual limb needs to increase the number of socks after the swelling and thinning.

When wearing a temporary thigh prosthesis, first apply some talcum powder on the residual limb, and then put on a silk material called roll-up. This material can reduce the friction on the residual limb during wearing, and then the residual limb The bottom end of the sock is passed through the bottom hole of the temporary receiving cavity, and then the residual limb is pulled into the receiving cavity. After a few days of wearing it for a few weeks, the residual limb needs to increase the number of socks after the swelling and thinning. The temporary receiving cavity of gypsum material can be filled with plaster on the inner wall of the receiving cavity when the limbs become thin. For the receiving cavity of resin material, some foam pads of corresponding thickness can be glued on the inner wall of the receiving cavity to adapt to the thinning residual. limb. For amputees with unsatisfactory residual limbs, especially the elderly, children, and women, in order to reduce the weight of the prosthesis and make it easier for the prosthesis to adapt to the receiving cavity, a resin material or polymer material bandage can be used to make a temporary prosthetic receiving cavity.

   3. Advantages of using temporary prostheses

   After the patient's limb is amputated, some doctors are more conservative because they have to wait for the wound to heal. They don't know the time of prosthesis installation very well. The patient's doctor's advice is to consider installing the prosthesis after three months. Within three months of waiting for recovery, patients mainly rely on crutches or wheelchairs to transfer. Most of the amputation residual limbs have unbalanced muscle strength, which can lead to adduction, abduction or flexion deformities of the residual limb, which will cause the patient to assemble prostheses. Great influence. In addition, most patients suffer from phantom limb pain and residual limb pain after amputation. The patient's skin resistance and weight-bearing ability training are all factors that affect the later assembly of formal prostheses.

   Assembling temporary prostheses can bear weight as soon as possible, prevent joint flexion and abduction deformities, improve the overall condition, and prevent complications caused by prolonged bed rest; stand and walk training using prostheses can be carried out as soon as possible. Shorten the recovery time; the prosthesis maker can designate a formal prosthesis that is more suitable for the patient through the observation and modification of the temporary prosthesis; it can also promote the early finalization of the residual limb and customize the formal prosthesis as soon as possible. Clinically, after wearing a temporary prosthesis for two weeks, there is no change in the circumference measurement of the residual limb or the prosthesis no longer adds socks, the plaster receiving cavity and the resin receiving cavity are no longer filled with materials, it can be regarded as the residual limb is basically shaped. Customized formal prosthesis.

Nowadays, when prosthesis manufacturers make formal prostheses, they usually give patients an additional receiving cavity